This 4-button keypad provides a useful human interface component for microcontroller projects. Convenient adhesive backing provides a simple way to mount the keypad in a variety of applications. The Keypad features a total of 4 buttons. This is a membrane keypad with no moving parts.A female 5-pin b..
The 74LS12 Triple 3-Input Positive NAND Gates With Collector Outputs contains three 3 input independent gates each of which performs the positive logic NAND function. 74LS12 IC can be soldered directly to the circuit board or can be mounted on a 14 pin IC base. 74LS12 Triple 3-Input Positive NAND Ga..
The PCF8591 is a 8-Bit A/D - D/A Converter in a single-chip, single supply low power 8‑bit CMOS data acquisition device with four analog inputs, one analog output and a serial I²C‑bus interface.Features of PCF8591 8-Bit A/D - D/A Converter:Single power supply.Operating supply voltage 2.5 V to 6.0 V...
12V 3.2A SMPS - 38W - DC Metal Power Supply - Good Quality - Non Water Proof12V 3.2A SMPS - 38W - DC Metal Power Supply is one of Mornsun’s enclosed AC-DC switching power supply. It features universal AC input and at the same time accepts DC input voltage, cost-effective, low no load power cons..
10PCS HSS DRILL BIT SET - HIGH SPEED STEEL - BLACK OXIDE FINISH - WITH INDEX
HIGH SPEED STEEL DRILL BIT SETS
These basic drill bits are made from high speed steel that meets or exceeds the federal specifications for industrial ratings. They are rated for drilling in most metals and all types of wo..
This is a 4 bit LED display breakout module used in diffrent projects.Features of 4 Bit LED Display:Easy to use.Easy to interface.Long life.Applications of 4 Bit LED Display:It is used in robotics.Multiple DIY projects and circuit construction.Easy to use.Easy to interface.Long life.Also Searched as..
This is a 4 bit keypad breakout module designed for switching purpose.Features of 4 Bit Keypad:Easy to use.Ease of interfacing.Long life.Applications of 4 Bit Keypad:It is used in Arduino/AVR/ARM/PIC/ projects.Note: Images shown is only for representation. The actual product may vary with the pictur..
The TTP223B Digital Touch Sensor capacitive touch switch module for AVR, Arduino, ARM and other MCU. The module is based on a touch detection IC (TTP223B)\'s. Under normal conditions, the module output low, low-power mode to mode; touch of a finger when the corresponding position, the module will ou..
The twist drill bit with straight shank, sharp spiral groove; Used widely to drill the wood, metal, aluminum, iron material; The twist drill bit is used with electrical drilling machine.(not included).Features of 1/16 Inch OR 1.58 MM PCB Drill Bits:Good Quality.Long life.Applications of 1/16 Inch OR..
8 Bit LED Display is a light weight easy to use break out module. This 8 Bit LED Display is compatible with any circuit and any microcontroller module.Features of 8 Bit LED Display:Easy to use.Easy to interface.Long life.Applications of 8 Bit LED Display:LED blinking project.Multiple DIY projects.Al..
This A/D converter module is used to convert the analog output signal of any sensor into digital output signal.Features of A/D Sensor And Converter:Ease to use.Easy of interfacing.Onboard I/O connector.Applications of A/D Sensor And Converter:It is used in A/D converting purposes.Multiple DIY projec..
This single digit Common anode Seven Segment Display is a light weight easy to use break out module. This single Digit Common anode Display is compatible with any circuit and any microcontroller module.Features of Single Digit Common Anode Seven Segment Display:Ease to use.Ease of interfacing.Long l..
The Common Anode Seven Segment Display is a light weight easy to use break out module. This Double Digit Common Anode Display is compatible with any circuit and any microcontroller module.Features of Double Digit Common Anode Seven Segment Display:Ease to use.Ease of interfacing.Long lasting.Applica..
The ADC0804 is a very commonly used 8-bit analog to digital convertor. It is a single channel IC, i.e., it can take only one analog signal as input. The digital outputs vary from 0 to a maximum of 255. The step size can be adjusted by setting the reference voltage at pin9. When this pin is not conne..
This is a 16 Way XD 62B TTP229 Capacitive Touch Switch Digital Sensor Module Board Plate used in various switch controlled applications.Features of 16 Ways Capacitive Touch Switch:Onboard TTP229 capacitive 16 key touch induction IC.Onboard power light.Working voltage: 2.4 V to 2.4 V.Modules, you can..
HMC5883L-BB is a breakout board of HMC5883L, a 3-axis digital magnetometer designed for low-field magnetic sensing. The HMC5883L includes high-resolution HMC118X series magneto-resistive sensors plus an ASIC containing amplification, automatic degaussing strap drivers, offset cancellation, and a 12-..
It is an IR based proximity Sensor Array that provides 2 Bit of Digital output based on the Surface sensed by the sensors. The array is a group of 2 IR sensors which sense precisely the changes and provides a perfectly differentiate input values for constructing an intelligent Robot.Features of Two ..
This Arduino 6-Bit Keypad & LED Shield has a large range of features which makes it ideal for beginners who just want to experiment and learn, or just as a general purpose shield for more advanced uses.Features of 6 Bit Keypad Cum LED Arduino Shield:Easy to use.Easy to interface.Applications of ..